[. . . ] Power cord with plug Important safety instructions Caution: do not use the Electric heating appliances operate at appliance near bath tubs, washbasins or any other receptacle containing water. Protect the appliance from moisture and splashing water and do not operate it with wet hands. In the vicinity of any water source, there is a risk even when the appliance is switched off. [. . . ] To prevent damage to the power cord, - do not bend or kink the cable, especially where it leaves the housing, - do not pull on the cord, - do not coil the power cord around the appliance. Always switch off and remove the plug from the wall socket after use, as well as - in cases of malfunction, and - during cleaning. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. Do not place the appliance on any surfaces sensitive to heat during or immediately after use. This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. This appliance is intended for domestic use only and not for commercial applications. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The addresses can be found in the appendix to this manual. Cool function The cool function can be used at any time during the drying process. Operation Connect the hair dryer to a suitable wall socket and use the slide switch to select the desired power setting. Cleaning and care Before cleaning the hair dryer, remove the plug from the wall socket and let the appliance cool down completely. To avoid the risk of electric shock, do not clean the hair dryer with water nor immerse it in water. - If necessary, the housing of the hair dryer may be wiped with a dry lint-free cloth. [. . . ] It uses the build-up of a negative `ion-cloud' to prevent `flyaway' hair caused by a positive charge. The IONIC function is automatically enabled during use, irrespective of the switch settings. Styling nozzle The styling nozzle can be fitted to the air outlet to facilitate shaping the hair during blow drying. [. . . ]